Saturday, September 5, 2009

HSU Room Lighting

Contributed by Sam
Lights: Ra 170CT & 85Tr, NiteCore D10 (Nichia 083), CMG-R
Location: Campus Apartments

Upon arriving at school for Fall semester, I began to live utilizing the few items I brought with me from home.

The harsh florescent-tube lighting of the room was too bright, and wasted too much electricity for me to just be sitting in here, staring at a book...I noticed that my roommate had bought a desk lamp, that burns a 40w bulb.. That wouldn't do for me.

So I began inspecting my room, noticed that the bed frame was made of wood, creating a surface which I could attach things by hook or pin. Promptly I purchased some finely wound hemp rope, maybe about 1/8 in diameter, and some clear plastic push pins.



With these items, I created a small rope line, which I could then attach things to and hang down above my desk.



As you can see, the 170CT with some diffusion works well as a temporary light source. I use the 85Tr as a permanent fixture there, making use of both its white and red output for late night computer work.





The CMG rides on the ceiling above my bed, providing ample book reading light and preserving night vision sensitivity. It is powered by nimh eneloops for long term use.



So far this setup has served me well. I have plenty of light output no matter where I am in the room. I also have a headlamp if it becomes necessary..

Spending my evenings without the main room light on makes me feel better. The harsh artificial light is unnecessary compared to flashlight usage and the reduction of electricity is a positive side effect.

1 comment:

Saturn said...

Hemp, of course. Nice work.